Instructions for Day at the Beach Necklace

Back to Day at the Beach Necklace Design Idea page

Techniques Used


Tools Needed

Step By Step Instructions

  1. Assemble 6 of these components:
    On a 24 gauge 1.5" gold eye pin, thread the following: a 3x5mm Aqua Satin glass rondelle, an 11mm Golden Shadow Swarovski flat briolette, and an Aqua Satin glass rondelle. Make a simple loop on the other end of your eye pin .
  2. Assemble the main necklace:
    Link a gold Starfish Connector to one of the Step 1 components, opening and closing the simple loop on the eyepin. Now join another Starfish Connector to the other side of your Step 1 component. Now connect all of the Step 1 components, alternating between the starfish and the component. Make sure that all of the briolettes are placed the same way, with the pendant bottom facing downward. When you finish, on each end there should be a starfish.
  3. Separate the gold textured cable chain into 2 equal parts (2-3/4" each). No need to cut the chain; just open the links with your chain nose pliers. Two pairs work better than one!
  4. Connect one end of one piece of gold chain to one of the starfish on the end of the assembled components, opening and closing the loop of the chain. No need for a jump ring! Connect one end of the other piece of gold chain to the starfish on the other end of the assembled components.
  5. Attach one end of the vine clasp set to one of the chain ends, opening and closing the end loop in the chain. Attach the other end of the vine clasp set to the other chain end.

CONGRATULATIONS! YOU ARE READY FOR A DAY AT THE BEACH (OR THE OFFICE)!

Back to Day at the Beach Necklace Design Idea page
Copyright © 2014 Bead Inspirations. Powered by Zen Cart